Combine this fully featured 1 lb. 7" x 3" x 1-5/8" data acquisition system with a Pocket PC for true portability! Software for Pocket PC and desktop PC included. |
|
||||||
You are here:
> Home
> Black Lab
> Battery Option
Battery OptionOperating the Black Lab with a battery is essential if you wish to use the system where no alternative power source (like AC wall current) is available. The Black Lab system can be powered by an integral battery power source. The battery can also function also as an excellent back up battery source in case AC power becomes unavailable.The battery will switch over automatically. The battery is very compact and slides in and out of the battery holder easily for fast replacement with a fresh battery. If the battery power is depleted, the Black Lab will turn itself off until another battery or AC power is supplied.
Side view of battery option showing cutout for charge indication.
The status of the battery charge (in per cent of remaining power) can be seen by pressing on the button label on the side of the battery visible through the cutout. Different LED’s will illuminate showing the remaining power left in the battery. The Black Lab system will warn the user that the battery power is low on the front panel.
The battery charger will charge two batteries in the same charger. The charger will charge one battery first and when complete will begin charging the other (if present). Provision for recalibrating a battery operating characteristics is also included in the charger. Note that Li Ion batteries can be recharged at any time to “top off” the battery. It is not necessary to fully discharge the battery before recharging. Home | About Us | Black Lab | Pricing & Options | Software | Technical Information | Contact Us |
|||||||
PO Box 3448 - Alliance, Ohio 44601 - 330-821-5800 - Fax 330-821-7625 - www.analoginterfaces.com